In case the hot-water pipes running in the boiler to the radiators are not insulated, you could be losing out on potential savings on your power bill. Rather than letting heat escape through the pipe walls to unconditioned regions of your house, add insulation to send the heat where you need it — to your radiator. It does not cost a whole lot to insulate these Boston AC repair specialists, nor entail a good deal of work, and it may save big on your monthly energy costs over time. This method also works to insulate water heater pipes or the pipes that lead to a radiant-floor El Paso AC repair specialists system in your house.

Measure the outer diameter of the water pipes using calipers or eyeball the diameter against a measuring tape. Select pipe insulation with a minimum inner diameter equal to the outer diameter of the pipes at a fantastic fit. Should you use pipe insulation sized too small for the pipe, it won’t offer good enough insulation.

Measure the period of the exposed water heater in your home. Insert the length measurements with each other to calculate just how much pipe insulation you need. You can pick from foam pipe insulation which has a slit in it to easily fit over smaller heated pipes or should you prefer, use fiberglass pipe insulation with a hard shell cover or even an insulating material that provides an adhesive-backed flap for sealing the insulation in place. All these sorts slip over the pipe.

Slip the insulation over the pipe and then peel the adhesive backing from the flap. Seal the flap over the cut end of the pipe for a tight fit. Cut the insulation to fit lengths of pipe bigger than the entire length of the insulating material — frequently 6 feet for specific brands. Repeat for all exposed pipes which need insulation.

Insert pipe wrap or insulating material to elbow pipe joints. You can pick up separate units made for elbows or use insulated pipe wrap around these areas secured in place with metal foil tape.