Whether you have an automatic or manual transmission system for shifting the gears of the Troy-Bilt lawn (Salt Lake City, UT), difficulty putting the machine into equipment or shifting from 1 gear to another often signals a mechanical malfunction that requires immediate attention. On the flip side, something as simple as operator error could possibly be the problem behind your shifting problems. Research the possibilities which may be supporting your shifting problems before employing a service person to take care of the problem.

Lack of Lubrication

Without adequate lubrication, the gears in the transmission can become reluctant and difficult to shift. Check the transmission fluid level frequently and modify the fluid based on the schedule recommended in the operator’s manual provided by Troy-Bilt. If the transmission fluid level is low, particularly when you’ve recently filled the reservoir, then check the area in which you park the yard tractor for signs of a reddish-colored fluid that might signal a transmission fluid leak.

Gear Problems

From time to time, the gears on the Troy-Bilt lawn for example in Salt Lake City may develop mechanical problems. Troy-Bilt warns consumers to prevent forcing the shift lever into gear because it may irreparably damage the transmission. After the challenge is a mechanical one, avoid working on it yourself. Doing so could void the warranty that came with the yard and leave you paying out of pocket for repairs which the guarantee may have covered. Seek out a certified service man who is qualified to function on Troy-Bilt machinery.

Drive Belt Issues

Surprisingly, a problem with shifting gears on a yard tractor may not have anything to do with the transmission at all. On the contrary, it may be because of problem with the drive belt or its pulleys. Because the drive belt discharges tension on the trans-axle when the clutch is depressed, a buckle which sticks may cause shifting problems. Analyze the belt for cracks, tears and wear which may cause problems and replace the drive belt if necessary.

Operator Error

If you attempt to shift gears on any Troy-Bilt lawn in Salt Lake City tractor without following the proper procedure, you are likely to encounter hard shifting. On automatic versions, shift the throttle into the fast position and place the shift lever in reverse or forward. Manual transmission yard tractors require slightly more effort in regards to changing gears. Step on and then release the clutch/brake pedal to release the parking brake. To shift from 1 gear to the other, depress the clutch/brake pedal partially and shift to the desired higher or lower gear. Always block the tractor fully to shift gears. Unlike automobiles, lawn in Salt Lake City tractors require that you shift gears just when stopped, rather than when the tractor is on the transfer. Failure to shift in this way can cause hard shifting or damage the gears.