While counter-tops characteristic laminate, granite or tile, bamboo plywood serves as an alternative area. Bamboo â a renewable and eco friendly source that lends itself to everything from toothpicks to furniture â provides a tough and rigid counter-top choice that heartily resists water and corrosion. Because so many bamboo plywood comes in a unfinished state, youare going to need to seal it to bolster its scratch resistance and also make it more easy to sustain.
Sand the whole unfinished area of the counter-top, utilizing 100-grit sandpaper connected to your sanding block or random-orbit sander. Follow the grain of the wood, producing strokes in one course if sanding using a block. Transfer the sander on the area of the plywood gradually without exerting pressure if energy sanding.
Vacuum the the top of plywood using a brush attachment to remove the dust. Wipe the area using a damp microfiber cloth and let it air-dry.
Stir the non toxic polyurethane complete using a paint stirrer. Dilute it by mixing 2 parts polyurethane in a empty can to TO AT LEAST ONE part mineral spirits. Mix the the answer having a paint stirrer and use it to the bamboo plywood. Allow to remedy overnight.
Restir the nontoxic polyurethane end. A coat of end that was undiluted, utilizing a normal-bristled paint brush. Dip the brush to the polyurethane about 1-inch. Brush the plywood with lengthy, somewhat overlapping strokes that follow the wood grain from end-to-end, making a thin, even coat. Allow this coat to dry for approximately five minutes and use another coat in the same manner. Let the plywood dry for 2-4 hrs.
Sand the area using 220-grit sandpaper. Vacuum the area and wipe it clean of dirt as you did. Let the counter-top air dry. Restir and use a coat utilizing the same technique when implementing the coats employed. Allow the plywood to dry for 24 hours or as advised from the producer of the polyurethane.