The way to Keep Waxed Floors Shiny

Paste wax isn’t recommended for all floors, particularly vinyl floors or hardwood or laminate floors with polyurethane finishes. On linoleum or oil-finished hardwood floors, however, a coat of paste wax offers additional protection and keeps the floor looking shiny, as long as you maintain it correctly. Because it isn’t a hard finish, wax scratches easily and loses its shine, but you can generally re-amalgamate it and restore the luster using periodic buffing.

Floor Cleaning

Sweeping and vacuuming on a weekly basis are a must when you’ve waxed floors; small bits of dirt that get dragged around in your shoes create tiny scratches that spread mild, and the effect is cumulative. In addition, you must mop the floor occasionally using a product that’s safe for it. In the case of hardwood, it is best use a prefinished hardwood flooring cleaner, but in case it’s necessary to use water, blend it using mild soap, such as dish soap, from the ratio of an ounce. Wash using a damp cloth or mop — not a wet one — and dry immediately with a separate rag. Don’t let water stand; it may ruin the floor.

Using a Floor Buffer

When you’ve waxed floors, then it pays to get your floor buffer, which means you don’t need to rent one each time the wax turns dull. Whether you rent a buffer or own one, then you’ll want lambswool buffing attachments to use with this. Working the buffer is catchy at first but rapidly becomes simple and even gratifying. Simply plug in the machine; flip it on and guide it using the handle as it glides above the floor. Remove furniture and rugs in the room to get them out of the way before you let the buffer loose.

A Buffing Regimen

When it is time to buff your waxed floors, then it is a good idea to have a bottle of finish restorer on hand to make the most of the shine. Start the procedure by sweeping and vacuuming any loose dust; subsequently use the finish restorer using a mop or by spraying it on the floor, with a spray bottle; the latter option is best for waxed hardwoodfloors. Run the buffer above the floor while the restoring alternative remains wet, and alter the buffing pad as needed when it messed up with wax. Finish by sweeping and vacuuming to remove debris left by the buffer.

Restoring the Wax

Among the realities of a wax finish is that it doesn’t last forever, and at some stage, you won’t be able to restore the shine by buffing. At this point, you want to strip the wax and apply a new coat. Get a fantastic pair of elbow pads, since the best way to do this job would be to rub off the old wax using a rag and odorless mineral spirits. When the old wax is gone, then apply a fresh coat with a rag; buff it using the ground, along with your floor will look as good as fresh.

See related