Easy Way to Reupholster Patio Furniture



Updating patio furniture with a brand new look isn’t complicated or expensive in comparison to replacing it with new furniture. When the frames are hardy, whether they’re wood or metal, they may be refinished. However, an even less complicated project entails reupholstering the cushions. New fabric on polyurethane outside cushions makes the furniture seem fresh and adds a designer touch. New covers may be sewn if you are handy with a sewing machine; however if not, a hot glue gun simplifies the project even more.

A Calculating Amount

The simplest way to estimate just how much material you will need is to eliminate one of the old covers and measure which, adding a few extra inches for overlap if you’re gluing, or for seam allowances if you’re sewing. If you decide to assess the cushions, then assess the width of the cushion in the arm to arm and multiply by 2 in the event that you want the identical fabric on both sides. Assess the height or the depth and double that amount. Assess the depth from front to rear. Upholstery is usually is 54 inches wide. You may want to figure out out how to cut the material on chart paper first. Once you’ve an estimate for each cushion, then multiply this amount by the entire amount of cushions you’ll be covering.

Fabulous Fabric

The first matter to consider when selecting a material for patio furniture is durability. Outdoor furniture must be covered with material that is mildew and fade resistant, so be certain the examples you’re viewing online or in person are intended for exterior use. When considering colours, a colour wheel is useful. This tool helps you in selecting coordinating colors, such as complementary colors. Consider the type of pattern. Geometric prints, stripes, chevrons or an abstract design provides a contemporary appearance. Floral or botanical themes lend a traditional look, or you might like something tropical with themes of broadleaf greenery, vibrant blooms or palm trees.

Away With the Old

Cut through the seams with a utility knife or seam ripper to remove old cloth. Carefully scrutinize the cotton. When it’s torn up or very old, replace it. Utilize the old batting as a template to cut new pieces in the event that you can, or just wrap the new batting around the cushion foam to measure and cut accordingly. Wrap the brand new piece around the polyurethane and fasten it underneath with hot glue. The old part of fabric you eliminated can be applied as a template to cut the new material to size: simply make sure you add the extra inches for overlap or seam allowances. It’s also possible to cover the old material without removing it if it can not be observed through the brand new fabric.

On With the New

Applying the new material with a glue gun is like wrap a gift. Lay out the brand new material on a flat surface with the wrong side facing upwards. Set the cushion on the cloth, where one end is glued to the underside. The opposite end of the cloth wraps all of the way round the cushion, overlapping the pasted border and end near the cushion’s edge. There, fold it under and glue along the edge of the cushion. Each end is finished just like a gift-wrapped box. Excess fabric is cut so that the borders can be neatly folded and glued in place.