The phrase “solid-surface counter-top” refers to some substance mixture of crushed minerals, resin and binders. These counter tops are a more affordable option to rock or granite, but provide the exact same advantage of colour that is solid throughout, to ensure that harms can be fixed. Bits and blades should be utilized during cutting to cut the stuff to stop from gouging the top. Together with using a template, it is possible to cut on the counter top to the precise measurements wanted.
Draw on a precise template of the counter-top place inch luan Indicate the precise location of dividers and the cabinet sides. Label the template along all sides. Use several parts of the luan as-needed and label each piece to get rid of confusion. Add 1 1/4-inch to the peripheries of the counter top for the over-hang. Make use of a straightedge to indicate the abstract of the counter top on the templet. Cut out the template using a saw.
Than the counter-top bit is long, set up two saw-horses foot space between them. By way of example, when reducing on a 6-foot piece of counter top, set the saw-horses up 5 feet apart.
Place on every end. Draw on the layout of your counter top on the solid-surface utilizing the luan template.
Clamp a straightedge to the line over the back side of the counter top.
Drill a pilot hole in the counter-top bigger in relation to the router bit you are going to utilize to slice the at the front-edge of the counter top. This hole has to be to the exterior of the lines you drew — maybe not inside of the counter-top region.
Fit the router using a straight bit. Add the bit to the pilot hole. Cut the back side of the counter top over the line you drew.
Take away and transfer it to the front-side of the counter top. Clamp set up. Cut the leading edge of the counter top in the exact same way as the rear cuts.
So the sides of the counter top are perpendicular to the saw-horses rearrange the counter top on the sawhorses. Clamp the straightedge along one facet of the counter top. Cut over the breadth of the counter top. Repeat for the 2nd width